WVSD-Stainless-Steel-Submersible-Sewage-Pump
5-18-submersible-sewage-pump-02
Click to enlarge
Previous product
3-3-self-priming-peripheral-pump-01
AWZB-H1 Automatic Self-Priming Peripheral Pump
Back to products
Next product
WQ-QG Grinder Pump
WQ-QG Grinder Pump

WVSD Stainless Steel Submersible Sewage Pump

Performance Range 

Max. Flow: 27m3/h
Max. Head: 15

Application Limits

1. Maximum liquid temperature +40℃
2. pH level from 4-10
3. Maximum liquid density 1.2×103 kg/m3
4. Power frequency is 50Hz. Nominal voltage is 220VAC for single-phase and 380VAC with tolerance of ±10%.
5. Immersion depth from 0.5m-5m

Certificate

Application Fields 

WVS(D) series pumps are widely applied in industry, agriculture, mining, construction, municipal, environmental protection, etc. They are suitable for draining water containing particles such as short fibers, paper scraps, etc. and soft solid, such as muddy water, dirty water, domestic wastewater, sewage, manure, etc. They are ideal equipment for agricultural irrigation and drainage, pool silt cleaning and site construction, but do not apply to the location with explosion-proof requirements.

Features

1. Stainless steel casing and rod bolts, beautiful, durable and stable.
2. Opening impeller with good flow ability.
3. The stainless steel shaft extension, carbide double sides mechanical sealing.

Optional Available on Request

Other voltage or frequency is 60Hz

Add to quote
Add to Wishlist
SKU: PUM8916 Categories: , , , Tags: , , ,
Description

Performance Curves

5-18-submersible-sewage-pump-03

5-18-submersible-sewage-pump-04

 

Related products

deep-well-pumps-2
Close

3.5SG(m) 3.5’’ Deep Well Pump

Performance Range Max. Flow: 6.0m3/h Max. Head: 186m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement; 3. Pump sleeve with screw thread, single stage floating impellers; 4. Installation in 3.5" or larger boreholes; Optional Available On Request No
Add to Wishlist
Add to quote
Quick View
deep-well-pumps-5
Close

4SE(m) 4’’ Deep Well Pump

Performance Range Max. Flow: 22m3/h Max. Head: 480m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available SS304.
Add to Wishlist
Add to quote
Quick View
3-8-peripheral-pump-01
3-8-peripheral-pump-02
Close

QB Peripheral Pump

Performance Range 1. Max. Flow: 3.6m3/h 2. Max. Head: 60m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc. Features 1. Small size, high pressure 2. Easy installation & maintain Motor 1. Single-Phase 220V/50Hz 2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 3. Protection: IP44 4. Insulation: Class B Optional Available On Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. Stainless steel insert 4. NSK bearing 5. Motor whose insulation class is F 6. Other voltage or frequency is 60Hz
Add to Wishlist
Add to quote
Quick View
3-13-self-priming-peripheral-pump-01
Close

PW-Z Self-Priming Peripheral Pump

Applications Fields 1. The self-priming peripheral pump is suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. It’s widely used in household water supply, well water pumping, tap water pressure, water tower's supply, solar or hot water systems pressure, etc. Operating condition 1. Suction lift up to 8m 2. Liquid temperature ≤+90℃ 3. Environment temperature ≤ +40℃ 4. Max. working pressure: 5bar Features and advantages A self-priming peripheral pump for both hot and cold water. Advanced structure with lower noise. Intelligent control by both flow sensor and pressure sensor, which is convenient. Materials 1. Pump body: Cast iron with stainless steel insert 2. Motor casing: Aluminum 3. Impeller: Brass 4. Shaft: Welded by SUS304 and Cs45# 5. Mechanical seal: Ceramic/Graphite/NBR 6. Copper winding
Add to Wishlist
Add to quote
Quick View
JET Self-Priming Jet Pump 1
JET Self-Priming Jet Pump 2
Close

JET Self-Priming Jet Pump

Performance Range 1. Max. Flow: 6m3/h 2. Max. Head: 80m Application Limits  1. Suction head up to 9m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc. Features 1. The JET type self-priming pump 2. High suction, with short time 3. Different impeller material configuration Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Add to Wishlist
Add to quote
Quick View
deep-well-pumps-8
Close

6SE 6’’ Deep Well Pump

Performance Range
Max. Flow: 60m3/h Max. Head: 448m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Available with pump casing with plug, integrated stage floating impellers; 3. Installation in 6" or larger boreholes. Optional Available On Request No
Add to Wishlist
Add to quote
Quick View
3-7-centrifugal-pump-01
Close

PUM Centrifugal Pump

Performance Range 1. Max. Flow: 7.2m3/h 2. Max. Head: 27m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 3bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in solar boosting, water heater boosting, air energy boosting, various corollary equipment, etc. Features 1. Stainless steel impeller, shaft 304 2. Specially designed for view of the hot water circulation 3. High quality mechanical seal, NSK bearing, improve the reliability of the product Motor 1. Single-Phase 220V/50Hz 2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 3. Protection: IP44 4. Insulation: F Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F 3. Other voltage or frequency is 60Hz
Add to Wishlist
Add to quote
Quick View
deep-well-pumps-10
Close

QGY(D) 4’’ Screw Pump

Performance Range
Max. Flow: 2.4m3/h Max. Head: 163m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Owned intellectual property of rubber stator, effective against the influence of thermal shock; 4. Installation in 4" or larger boreholes; Optional Available On Request No
Add to Wishlist
Add to quote
Quick View