Click to enlarge
Previous product
QB Peripheral Pump
Back to products
Next product
JET-G1 Self-Priming Jet Pump

Cpm Centrifugal Pump

Performance Range

1. Max. Flow: 8.4m3/h
2. Max. Head: 59m

Application Limits 

1. Suction head up to 7m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 6bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5

Certificate

Applications Fields

1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in vegetable greenhouse water supply, breeding industry water supply and drainage, water tower water supply, pipeline pressurization, various corollary equipment, etc.

Features 

1. Single suction centrifugal pump, with high efficiency
2. Copper impeller, stable performance
3. High head, small flow rate

Motor

1. Single-Phase 220V/50Hz
2. Mechanical seal: Ceramic/Graphite/NBR rubber
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B

Optional Available on Request

1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz

Add to wishlist
Compare
Add to quote
SKU: PUM8883 Categories: , , Tags: , , , ,
Description

Performance Curve

3-4-centrifugal-pump-02

3-4-centrifugal-pump-03

Related products

Compare
Close

4SE(m) 4’’ Deep Well Pump

Performance Range Max. Flow: 22m3/h Max. Head: 480m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available SS304.
Quick view
Compare
Close

QB Peripheral Pump

Performance Range 1. Max. Flow: 3.6m3/h 2. Max. Head: 60m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc. Features 1. Small size, high pressure 2. Easy installation & maintain Motor 1. Single-Phase 220V/50Hz 2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 3. Protection: IP44 4. Insulation: Class B Optional Available On Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. Stainless steel insert 4. NSK bearing 5. Motor whose insulation class is F 6. Other voltage or frequency is 60Hz
Quick view
Compare
Close

JET Self-Priming Jet Pump

Performance Range 1. Max. Flow: 6m3/h 2. Max. Head: 80m Application Limits  1. Suction head up to 9m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc. Features 1. The JET type self-priming pump 2. High suction, with short time 3. Different impeller material configuration Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Quick view
Compare
Close

PW-Z Self-Priming Peripheral Pump

Applications Fields 1. The self-priming peripheral pump is suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. It’s widely used in household water supply, well water pumping, tap water pressure, water tower's supply, solar or hot water systems pressure, etc. Operating condition 1. Suction lift up to 8m 2. Liquid temperature ≤+90℃ 3. Environment temperature ≤ +40℃ 4. Max. working pressure: 5bar Features and advantages A self-priming peripheral pump for both hot and cold water. Advanced structure with lower noise. Intelligent control by both flow sensor and pressure sensor, which is convenient. Materials 1. Pump body: Cast iron with stainless steel insert 2. Motor casing: Aluminum 3. Impeller: Brass 4. Shaft: Welded by SUS304 and Cs45# 5. Mechanical seal: Ceramic/Graphite/NBR 6. Copper winding
Quick view
Compare
Close

JET-G1 Self-Priming Jet Pump

Performance Range 1. Max. Flow: 6m3/h 2. Max. Head: 48m Application Limits  1. Suction head up to 9m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc. Features 1. 304 stainless steel pressed tensile pump body & pump cover 2. Hydraulic optimization design, excellent performance 3. Nozzle, guide vane and the impeller PPO engineering plastics 4. Products are complete in specifications, meet drinking water standards Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F 3. Other voltage or frequency is 60Hz
Quick view
Compare
Close

4SS 4’’ Deep Well Pump

Performance Range
Max. Flow: 10.8m3/h Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 4. Installation in 4" or larger boreholes. Optional Available On Request Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Quick view
Compare
Close

NK(m) 5’’ Submersible Pump

Performance Range
Max. Flow: 5.4m3/h Max. Head: 88m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.
Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement; 2. Built-in motor, the suction pump body 3. Installation in 5" or larger boreholes. Optional Available On Request Impeller is available with stainless steel 304
Quick view
Compare
Close

SGT Centrifugal Pump

Performance Range 1. Max. Flow: 39m3/h 2. Max. Head: 52m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +60℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in industrial and urban water supply, high-rise building boosting, fire protection system, breeding Features 1. Standard flange centrifugal pump 2. Large flow, high efficiency Motor 1. Three-Phase 380V/50Hz 2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 3. Protection: IP44 4. Insulation: Class B Optional Available on Request 1. Motor whose insulation class is F 2. NSK bearing
Quick view