Showing 1–12 of 85 results

Show sidebar
2ec-multistage-centrifuge-pumps
Close

2EC Pumps

The high efficiency and adaptability of these pumps to even the most unusual of applications, makes them ideal for use in the domestic, civil and industrial sectors.
3-1-centrifugal-pump-01
Close

2SGP(m) Centrifugal Pump

Performance Range 1. Max. Flow: 12m3/h 2. Max. Head: 50m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate: CE Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc. Features 1. Double impeller centrifugal pump, satisfies the requirement of high head. 2. Compact structure Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Mechanical seal: Ceramic / Graphite / NBR rubber 4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 5. Protection: IP44 6. Insulation: Class B Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F
2TSS/3TSS/4TSS PROFESSIONAL SOLAR PUMP
Close

2TSS/3TSS/4TSS PROFESSIONAL SOLAR PUMP

Characteristic
Close

3.5SE(m) 3.5’’ Deep Well Pump

Performance Range
Max. Flow: 7.2m3/h Max. Head: 169m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, integrated stage floating impellers; 5. Installation in 3.5" or larger boreholes; Optional Available On Request NO
deep-well-pumps-2
Close

3.5SG(m) 3.5’’ Deep Well Pump

Performance Range Max. Flow: 6.0m3/h Max. Head: 186m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement; 3. Pump sleeve with screw thread, single stage floating impellers; 4. Installation in 3.5" or larger boreholes; Optional Available On Request No
Placeholder
Close

3C/4C ECONOMICAL SOLAR PUMP

Characteristic
Close

3S/4S ECONOMICAL SOLAR PUMP

     
deep-well-pumps-3
Close

3SE(m) 3’’ Deep Well Pump

Performance Range Max. Flow: 3.6m3/h Max. Head: 142m
Application Limits  1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.
Certificate
Application Fields 1. Building/construction work/Domestic water supply; 2. Irrigation and Small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory.
Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor & thermal mode protector; 3. Available with pump casing with plug, single stage floating impellers; 4. Installation in 3" or larger boreholes.
Optional available on request Discharge chamber, Inlet parts are available with Brass or Stainless steel 304.
deep-well-pumps-4
Close

3SG(m) 3’’ Deep Well Pump

Performance Range Max. Flow: 3.6m3/h Max. Head: 142m Application Limits  1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/Domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features  1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Pump sleeve with screw thread, single stage floating impellers; 4. Installation in 3" or larger boreholes. Optional Available On Request Oil chamber is available with Brass or SS304; Discharge chamber, Inlet parts are available with Casting or SS304.
3TSC/4TSC SOLAR PUMP
Close

3TSC/4TSC Solar Pump

1.APPLICATION AREA: This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and living water. The living condition could be much improved. It also can be used for fountains. 2.MATERIAL OF PARTS: Outlet: stainless steel Pump body: stainless steel Motor body: stainless steel Bearing: C&U 3.ADVANCED TECHNOLOGY: 1.Application innovation Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor. 2.Technics innovation Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved. 3.Structure innovation Oil filling, convenient installation and environmental protection 4.HIGHLIGHTS a.Energy-saving and environment-protected green products b.High technique products adopting MPPT and DSP chip technique. c.100% copper wire, cold-rolled silicon steel sheet d.CE certificate e.Advanced three phase brushless DC motor f.Stainless steel 316 screws g.3 years warranty 5.PRINCIPLE OF OPERATION: Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water 6.ADVANTAGES OF SOLAR PUMP SYSTEM: A.It is easier and more widely used than any other dynamoelectric driven pumps. B.It is more economical and more environmentally friendly. 7.MODEL SELECTION: a.The power of solar panel = power of pump ×1.3 The voltage of solar panel = the voltage of pump The controller should be matched b.Select the batteries according to the following formulas: The use hour of battery = The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours c.The battery capacity= the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×(200÷12)=100AH
3TSS/4TSS SOLAR PUMP
Close

3TSS/4TSS Solar Pump

1.APPLICATION AREA: This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and living water. The living condition could be much improved. It also can be used for fountains. 2.MATERIAL OF PARTS: Outlet: stainless steel Pump body: stainless steel Motor body: stainless steel Bearing: C&U 3.ADVANCED TECHNOLOGY: 1.Application innovation Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor. 2.Technics innovation Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved. 3.Structure innovation Oil filling, convenient installation and environmental protection 4.HIGHLIGHTS a.Energy-saving and environment-protected green products b.High technique products adopting MPPT and DSP chip technique. c.100% copper wire, cold-rolled silicon steel sheet d.CE certificate e.Advanced three phase brushless DC motor f.Stainless steel 316 screws g.3 years warranty 5.PRINCIPLE OF OPERATION: Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water 6.ADVANTAGES OF SOLAR PUMP SYSTEM: A.It is easier and more widely used than any other dynamoelectric driven pumps. B.It is more economical and more environmentally friendly. 7.MODEL SELECTION: a.The power of solar panel = power of pump ×1.3 The voltage of solar panel = the voltage of pump The controller should be matched b.Select the batteries according to the following formulas: The use hour of battery = The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours c.The battery capacity= the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×(200÷12)=100AH
Close

3TSSI SOLAR PUMP

1.APPLICATION AREA: This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and living water. The living condition could be much improved. It also can be used for fountains. 2.MATERIAL OF PARTS: Outlet: stainless steel Pump body: stainless steel Motor body: stainless steel Bearing: C&U 3.ADVANCED TECHNOLOGY: 1.Application innovation Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor. 2.Technics innovation Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved. 3.Structure innovation Oil filling, convenient installation and environmental protection 4.HIGHLIGHTS a.Energy-saving and environment-protected green products b.High technique products adopting MPPT and DSP chip technique. c.100% copper wire, cold-rolled silicon steel sheet d.CE certificate e.Advanced three phase brushless DC motor f.Stainless steel 316 screws g.3 years warranty 5.PRINCIPLE OF OPERATION: Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water 6.ADVANTAGES OF SOLAR PUMP SYSTEM: A.It is easier and more widely used than any other dynamoelectric driven pumps. B.It is more economical and more environmentally friendly. 7.MODEL SELECTION: a.The power of solar panel = power of pump ×1.3 The voltage of solar panel = the voltage of pump The controller should be matched b.Select the batteries according to the following formulas: The use hour of battery = The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours c.The battery capacity= the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×(200÷12)=100AH