BZMJ Self-healing Shunt Capacitor
1.1 Electric ratings: ≤AC1000V;
1.2 Application: For improvement of power factor and power quality;
1.3 Standards: IEC/EN 60831-1:2014 IEC/EN 60831-2:2014.
CATALOG
BZMJ Catalog PDF
CJ19 Contactor for Capacitor Switching
1.1 Electric ratings: AC50/60Hz, up to 690V;
1.2 Standard: IEC/EN 60947-4-1
CATALOG
CJ19 Contactor for Capacitor Switching PDF
DDSU666 Single Phase DIN-Rail Meter
Reliable Choice
◎ LCD Display
◎ Bi-Direction Measurement
◎ DIN-Rail installation
CATALOG
DDSU666 PDF
DTSU666 Three Phase DIN-Rail Meter
Reliable Choice
◎ LCD Display
◎ Bi-Direction Measurement
◎ DIN-Rail installation
CATALOG
DTSU666 PDF
DZ158 Moulded Case Circuit Breaker
1.1 Function
protection of circuits against short-circuit currents,protection of circuits against overload currents,switch,isolation.
1.2 Selection
Technical data of the network at the point considered:the earthing systems (TNS, TNC),short-circuit current at the circuit-breaker installation point, which must always be less than the breaking capacity of this device,network normal voltage.
1.3 Approvals and certificates
Detailed information, please refer to Certificates Table on the last page.
CATALOG
DZ158 Moulded Case Circuit Breaker(DC type)
DZ158LE Residual Current Operated Circuit Breaker
1.1 Function
Personnel and fire protection
Cable and line protection against overload and short-circuits.
1.2 Selection
I∆n ≤ 30 mA: additional protection in the case of direct contact.
I∆n ≤300 mA: preventative fire protection in the case of ground fault currents.
AC class – Tripping is ensured for sinusoidal,alternating currents, whether they be quickly applied or slowly increase.
1.3 Approvals and certificates
CATALOG
DZ158LE Residual Current Operated Circuit Breaker PDF
eB Miniature Circuit Breaker
1.1 Function
protection of circuits against short-circuit currents,protection of circuits against overload currents,switch,isolation.
1.2 Selection
Technical data of the network at the point considered:the earthing systems (TNS, TNC),short-circuit current at the circuit-breaker installation point, which must always be less than the breaking capacity of this device,network normal voltage.
Tripping curves:
B curve (3-5In)
protection for people and big length cables in TN and IT
systems.
C curve (5-10In)
protection for resistive and inductive loads with low inrushcurrent.
D curve(10-20In)
protection for circuits which supply loads with high inrush current at the circuit closing
(LV/LV transformers, breakdown lamps).
1.3 Approvals and certificates
Detailed information, please refer to Certificates Table on the last page.
CATALOG
eB Miniature Circuit Breaker PDF
HDLRT0 Fuse for Distribution
HDLRT0 Fuse for Distribution
1.Electric ratings: AC50Hz, AC380V/DC400V, up to 1000A;
2.Application: for protection of power distribution apparatus against over-load and short circuit;
3.Standard: IEC 60269.
HH15-QA Switch Disconnector
1.1 Application
Mainly used in the distributing and motor circuit which has high short-circuit current,and acted as main switch or master switch infrequently operated by hand,
it is particularly suitable in the relative high class with drawable low voltage complete equipment.
They provide safety isolation and protection against overcurrent for any low voltage electrical circuit.
1.2 Standard: IEC/EN 60947-3.
1.3 General characteristic
Full-enclosed structure
Unique rolling insert type contact system.
HH15-QP Switch Disconnector
1.1 Application
Mainly used in the distributing and motor circui which has high short-circuit current,and acted as main switch or master switch infrequently operated by hand,
it is particularly suitable in the relative high class with drawable low voltage complete equipment.
They provide safety isolation and protection against overcurrent for any low voltage electrical circuit.
1.2 Standard: IEC/EN 60947-3.
1.3 General characteristic
Full-enclosed structure
Unique rolling insert type contact system.
HH15/QSA Fuse-switch Disconnector
1.1 Application
Mainly used in the distributing and motor circu which has high short-circuit current, andacted as main switch or master switch infrequently operated by hand, it is particularly suitable in the relative high class with drawable low voltage complete equipment.
They provide safety isolation and protection against overcurrent for any low voltage electrical circuit.
1.2 Standard: IEC/EN 60947-3.
1.3 General characteristic
Full-enclosed structure
Unique rolling insert type contact system.
JD-5 Integrated Protector
JD-5 Integrated Protector (hereinafter referred to as protector) is applicable for overload and phase-failure protection of AC motor @ A.C.50Hz, less than AC690V rated insulation voltage and 0.5A~400A rated operating current for its continuous working or discontinuous working. Protector and AC contactor are generally used cooperatively.
This product meets the requirements of IEC 60947- 4-1.
JD-5A Integrated Motor Protector
JD-5A Integrated Motor Protector (hereinafter referred to as protector) is applicable for overload, phase-failure and three-phase current unbalance protection of AC motor @ A.C.50Hz, less than AC690V rated insulation voltage and 1A~400A rated operating current for its continuous working or discontinuous working. Protector and AC contactor are generally used cooperatively.
This product meets the requirements of IEC 60947-4-1.
JKF8 Intelligent Low-Voltage Reactive Power Compensation Controller
JKF8 Intelligent Low-Voltage Reactive Power Compensation Controller (hereinafter referred to as 'controller' ) is a dedicated controller which can make compensations for the reactive power of low voltage distribution system.
CATALOG
JKF8 Catalog
JQX-10F Miniature Power Relay
1. 10A switching current
2. Various sockets available
3. Wide range of coil ratings
4. Certificate: UL, CE
JQX-13F Miniature High-Power Electromagnetic Relay
Contact switching capability of 10A; a complete range of AC/DC specifications; enclosed in transparent dust cover, a variety of mounting types; various sockets available;
Specifications with state indicators available;
Certifictaion: CE UL; models of the same type: LY2(N), HH62P(-L).
JSS48A Time Delay Relay
JSS48A Time Delay Relay is applicable for controlling circuit @ A.C.50Hz/60Hz, up to 380V rated control supply voltage and up to D.C. 240V rated control supply voltage as delay element to make/break circuit according to preset value.
JSZ3 Time Delay Relay
JSZ3 Time Delay Relay is applicable for automatic control system, such as machine automatic control, and complete equipment automatic control, etc.
JSZ6 Time Delay Relay
JSZ6 Time Delay Relay is applicable for automatic control system, such as machine tool automatic control, complete equipment automatic control. Etc.
